MD 3.5

Owned by 하승훈 (Deactivated)
Last updated: Jun 14, 2021 by tjkim (Deactivated)
2 min read
Release Note
The current v3.5.x version
 3.5.0.4

Release Date

ModuleVersion
2019-12-19MediaServer3.5.0.4

Supported VMS and URL Rule

Supported VMSURL Rule
HikVisionhikvision://{HikVision Server IP Address}:443/{Area}/{Device}
Milestonemilestone://{Milestone Recording Server IP}:7563/{Camera GUID}
Mirasysmirasys://{MIRASYS SERVER IP ADDRESS}:9000/{CAMERA PROFILE}
honeywell

honeywell://{DVM NAME}?cam_number={CAM NUMBER}

honeywell://{DVM NAME}?cam_name={CAM NAME}

honeywell://{DVM NAME}?site={SITE NUMBER}&cam_number={CAM NUMBER}

honeywell://{DVM NAME}?site={SITE NUMBER}&cam_name={CAM NAME}

* DVM NAME is the Host Name of Honeywell VMS.

* In order for MD to relay Honeywll VMS image, Host Name and Windows account information of PC with MD installed in Honewell administrator page must be registered in Users menu.

CiscoVSM-
ViewGuard

viewguard://{ViewGuard Server IP}:3000/{Channel}

Genetecrtsp://{Genetec VMS IP}:Port/{Camera }
Lenelrtsp://{Lenel VMS IP}:Port/{Camera }
CPPlus

rtsp://{md-ip}/Stream?url=[cpplus://{cpplus-ip}/{channel-number}/{subtype-number}]&id={cpplus-id}&pw={cpplus-pw}


1 ) Adding and Changing Features

  • Only MediaServer x64 is installed (x86 excluded)
  • Module MD300-Ref-ffmpeg has been updated
  • Open Source remove files
    MediaServer\etc\libav\avcodec-54.dll
    MediaServer\etc\libav\avdevice-54.dll
    MediaServer\etc\libav\avfilter-3.dll
    MediaServer\etc\libav\avformat-54.dll
    MediaServer\etc\libav\avutil-51.dll
    MediaServer\etc\libav\postproc-52.dll
    MediaServer\etc\libav\swresample-0.dll
    MediaServer\etc\libav\swscale-2.dll
    MediaServer\etc\VCA\
    MediaServer\etc\VCA\VCA5Lib.dll
    MediaServer\PipeModules\VCA.dll
 3.5.1.0

Release Date

ModuleVersion
2020-02-04MediaServer3.5.1.0

Supported VMS and URL Rule

Supported VMSURL Rule
HikVisionhikvision://{HikVision Server IP Address}:443/{Area}/{Device}
Milestonemilestone://{Milestone Recording Server IP}:7563/{Camera GUID}
Mirasysmirasys://{MIRASYS SERVER IP ADDRESS}:9000/{CAMERA PROFILE}
honeywell

honeywell://{DVM NAME}?cam_number={CAM NUMBER}

honeywell://{DVM NAME}?cam_name={CAM NAME}

honeywell://{DVM NAME}?site={SITE NUMBER}&cam_number={CAM NUMBER}

honeywell://{DVM NAME}?site={SITE NUMBER}&cam_name={CAM NAME}

* DVM NAME is the Host Name of Honeywell VMS.

* In order for MD to relay Honeywll VMS image, Host Name and Windows account information of PC with MD installed in Honewell administrator page must be registered in Users menu.

CiscoVSM-
ViewGuard

viewguard://{ViewGuard Server IP}:3000/{Channel}

Genetecrtsp://{Genetec VMS IP}:Port/{Camera }
Lenelrtsp://{Lenel VMS IP}:Port/{Camera }
CPPlus

rtsp://{md-ip}/Stream?url=[cpplus://{cpplus-ip}/{channel-number}/{subtype-number}]&id={cpplus-id}&pw={cpplus-pw}

videoneticsvideonetics://{Videonetics  ip:port}/{Server number}/{Camera number}


1 ) Adding and Changing Features

  • Videonatics module has been added
 3.5.2.0

Release Date

Module

Version

2020-02-28MediaServer3.5.2.0

Supported VMS and URL Rule

Supported VMSURL Rule
HikVisionhikvision://{HikVision Server IP Address}:443/{Area}/{Device}
Milestonemilestone://{Milestone Recording Server IP}:7563/{Camera GUID}
Mirasysmirasys://{MIRASYS SERVER IP ADDRESS}:9000/{CAMERA PROFILE}
honeywell

honeywell://{DVM NAME}?cam_number={CAM NUMBER}

honeywell://{DVM NAME}?cam_name={CAM NAME}

honeywell://{DVM NAME}?site={SITE NUMBER}&cam_number={CAM NUMBER}

honeywell://{DVM NAME}?site={SITE NUMBER}&cam_name={CAM NAME}

* DVM NAME is the Host Name of Honeywell VMS.

* In order for MD to relay Honeywll VMS image, Host Name and Windows account information of PC with MD installed in Honewell administrator page must be registered in Users menu.

CiscoVSM-
ViewGuard

viewguard://{ViewGuard Server IP}:3000/{Channel}

Genetecrtsp://{Genetec VMS IP}:Port/{Camera }
Lenelrtsp://{Lenel VMS IP}:Port/{Camera }
CPPlus

rtsp://{md-ip}/Stream?url=[cpplus://{cpplus-ip}/{channel-number}/{subtype-number}]&id={cpplus-id}&pw={cpplus-pw}

videoneticsvideonetics://{Videonetics  ip:port}/{Server number}/{Camera number}


1 ) Adding and Changing Features

  • Trans-encoding bug fixed
 3.5.2.9

Release Date

Module

Version

2020-09-29MediaServer3.5.2.9

NEW&ENHANCEMENT

1.Codec(H265/H264) : H265 Codec video is supported.

2.Bitrate option added at iMedia.config: This option was added to give proper bitrate according to resolution. You can adjust the bitrate value between 0-100 and the default is 70. Please note that the video quality changes depending on the option.

 3.5.2.12

Release Date

Module

Version

2021-01-15MediaServer3.5.2.12

NEW&ENHANCEMENT

1.The following items have been excluded. This item must be installed in advance.

  • vcredist2010sp1

  • vcredist2012

  • vcredist2015

2.FFmpeg version changed.

3.Change to try service restarting until second. subsequent failures ‘Take No Action’

FIXED BUG

1.Fixed bug that CiscoVSM_v7.14 cannot connect the MD. It different to call the API format according to CIscoVSM version and it will support the TLS 1.2

2.Changed to show live streaming when there is no recorded video at the time requested for Playback

3.Fixed bug that cannot connet CiscoVSM to MD. Rtsp url is showed local ip when CiscoVSM’s media server ip and CiscoVSM server ip are same

 3.5.2.14

Release Date

Module

Version

2021-03-11MediaServer3.5.2.14

Summary


It has been updated due to security vulnerability used library.

NEW&ENHANCEMENT

  • boost library version up to 1.65
  • openssl version up to 1.1.1j

FIXED BUG

  • None
 3.5.2.15

Release Date

Module

Version

2021-04-22MediaServer3.5.2.15

Summary

It has been updated due to security vulnerability used library. And License dll has been updated.

NEW&ENHANCEMENT

  • boost library version up to 1.65
  • openssl version up to 1.1.1k
  • Change the ULInspector.dll 2.1.0.0 to 2.1.0.1

1)Change location of ULInspector.dll:

C:\Program Files\N3N\MediaServer\etc -> C:\Program Files\N3N\MediaServer

2)Change creation location of Userkey file:

C:\N3NUserkey_{userkey}.txt to C:\ProgramData\N3N\N3NUserkey_{userkey}.txt

FIXED BUG

  • None
 3.5.2.16


Release Date

Module

Version

2021-06-08MediaServer3.5.2.16

Summary

It has been updated due to security vulnerability used library. And Video Streaming of CKC MCI issue has been fixed.

NEW&ENHANCEMENT

  • Remove milestone SDK of MD
  • Add MD timestamp parameter(MEDIA-2444)

       ** QA not tested(validation environment constraints)

FIXED BUG

  • Video does not appear of CKC MCI site(MEDIA-2431)

     ** Checked from media team not tested of QA